Volume gate molding machine main technical parameters: Equipment DIMENSIONS: 5000mm × 1600mm × 800mm Total weight: about 3000kg forming effective use of space: 750mm Depth: 17mm Pitch: 83mm electronic control system: all industrial computer PLC control of speed: 10000mm / min Host Power: 4kw Hydraulic Shears Power: 3kw roll gate molding machine is mainly imported from the feed platform, composed and with catcher molding machine host, forming cutting device, hydraulic station, computer control systems and other parts, is In multi-joint movement of door leaf series together, in a fixed slide, to the top of the door and down the spool is rotated about the door. Shutter doors to play the same role with the level of the wall separating it from the curtain plate, base plate, rails, bearings, reel, box, control box, roll doors, limiter, lintel, manual quick release switch device, push button switch and 13 parts of fuses and other components, usually installed in the wall separating the inconvenience of using the site. Volume gate molding machine is a considerable strength and a certain stiffness shutter doors, use galvanized steel as the material, the material thickness is generally determined based on the area of ??the doorway. High reliability, easy to install and configure anti-scission safety device. 1, door wide arc greater torque and strong wind, door thickness of 0.7-1.2mm. Durability has been replaced by an ordinary door. 2, long life, wind; wear resistance, corrosion resistance; 3, special or without ear connection, convenient location; 4, opening and closing is always smooth, tilt and obstruction does not occur.